View CDB8416_1112986.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

CDB8416 Evaluation Board for the CS8416 and CS8406
Features
G CS8416
Description
The CDB8416 is designed to allow easy evaluation of the CS8416 and CS8406. The board is designed for easy connection to an Audio Precision or other digital audio test system. Input and output data may be set for either balanced using the XLR connectors or unbalanced using the coax or optical connectors. Windows PC software provides a GUI to make configuration easy in Software Mode. The software communicates through the PC's parallel port to control the internal registers so that all the possible software modes of the CS8416 and CS8406 may be tested. ORDERING INFORMATION CDB8416 Evaluation Board
Digital Audio Receiver G CS8406 Digital Audio Transmitter G Receives and transmits AES/EBU, S/PDIF and EIAJ-340 compatible digital audio G Analog and Digital 3.3 Volt supply G 3.3 to 5.0 Volt Logic Interface supply G Operates in stand alone Hardware Mode or computer controlled Software Mode G Balanced and unbalanced inputs available
I
P a ra lle l P o rt to P C
O p tic a l In C o a x In X L R In C S 8416 C S 8406
O p tic a l O u t Coax O ut XLR Out
Preliminary Product Information
Cirrus Logic, Inc. http://www.cirrus.com
This document contains information for a new product. Cirrus Logic reserves the right to modify this product without notice.
Copyright Cirrus Logic, Inc. 2002 (All Rights Reserved)
(c)
OCT `02 DS578DB2 1
CDB8416
TABLE OF CONTENTS
Features................................................................................................................ 1 Description ........................................................................................................... 1 Table of Contents................................................................................................... 2 List of Figures ........................................................................................................2 List of Tables ......................................................................................................... 3 1. OVERVIEW .......................................................................................................... 4
1.1 1.2 1.3 1.4 1.5 1.6 1.7 CS8416 and CS8406 ................................................................................................ 4 Parallel Port .............................................................................................................. 4 Serial Digital Audio Inputs ......................................................................................... 4 Serial Digital Audio Outputs ...................................................................................... 4 Three Wire (PCM) Serial Audio Input and Output ..................................................... 4 Crystal Oscillators ..................................................................................................... 4 LED Function Indicators ............................................................................................ 5
2. CONFIGURATION SETTINGS ......................................................................... 5 3. BOARD SETUP ................................................................................................... 7
3.1 Power Supplies: ........................................................................................................ 7 3.2 Hardware Mode Settings: ......................................................................................... 7 3.3 Software Mode Settings: ........................................................................................... 7
3.3.1 Installing the Software: ................................................................................................. 7 3.3.2 Verifying Board Operation: ........................................................................................... 7
4. CDB8416.EXE USER'S GUIDE ........................................................................... 9
4.1 Main Window ............................................................................................................ 9
5. BILL OF MATERIAL ..........................................................................................24
LIST OF FIGURES
Figure 1. CS8416 Control Panel ..................................................................................................... 9
Contacting Cirrus Logic Support
For all product questions and inquiries contact a Cirrus Logic Sales Representative. To find one nearest you go to www.cirrus.com/en/contacts/sales
IMPORTANT NOTICE "Preliminary" product information describes products that are in production, but for which full characterization data is not yet available. "Advance" product information describes products that are in development and subject to development changes. Cirrus Logic, Inc. and its subsidiaries ("Cirrus") believe that the information contained in this document is accurate and reliable. However, the information is subject to change without notice and is provided "AS IS" without warranty of any kind (express or implied). Customers are advised to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgment, including those pertaining to warranty, patent infringement, and limitation of liability. No responsibility is assumed by Cirrus for the use of this information, including use of this information as the basis for manufacture or sale of any items, or for infringement of patents or other rights of third parties. This document is the property of Cirrus and by furnishing this information, Cirrus grants no license, express or implied under any patents, mask work rights, copyrights, trademarks, trade secrets or other intellectual property rights. Cirrus owns the copyrights of the information contained herein and gives consent for copies to be made of the information only for use within your organization with respect to Cirrus integrated circuits or other parts of Cirrus. This consent does not extend to other copying such as copying for general distribution, advertising or promotional purposes, or for creating any work for resale. An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. An export license and/or quota needs to be obtained from the competent authorities of the Chinese Government if any of the products or technologies described in this material is subject to the PRC Foreign Trade Law and is to be exported or taken out of the PRC. CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE ("CRITICAL APPLICATIONS"). CIRRUS PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF CIRRUS PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER'S RISK. Cirrus Logic, Cirrus, and the Cirrus Logic logo designs are trademarks of Cirrus Logic, Inc. All other brand and product names in this document may be trademarks or service marks of their respective owners.
2
DS578DB2
CDB8416
Figure 2. CS8406 Control Panel ................................................................................................... 10 Figure 3. Advanced Control Panel ................................................................................................ 10 Figure 4. CDB8416 Block Diagram ............................................................................................... 11 Figure 5. Power............................................................................................................................. 12 Figure 6. Digital Audio Inputs ........................................................................................................ 13 Figure 7. Hardware Switches ........................................................................................................ 14 Figure 8. Buffers............................................................................................................................ 15 Figure 9. Clock Buffers.................................................................................................................. 16 Figure 10. CS8416 ........................................................................................................................ 17 Figure 11. CS8406 ........................................................................................................................ 18 Figure 12. Digital Audio Outputs ................................................................................................... 19 Figure 13. PC Control Interface .................................................................................................... 20 Figure 14. Silkscreen Top ............................................................................................................. 21 Figure 16. Bottom.......................................................................................................................... 22 Figure 16. Bottom.......................................................................................................................... 22 Figure 15. Top............................................................................................................................... 23
LIST OF TABLES
Table 1. System Connections ........................................................................................................ 5 Table 2. CDB8416 Jumper Settings ............................................................................................... 5 Table 3. CDB8416 Switch Settings ................................................................................................ 6 Table 4. CDB8416 Bill of Materials .............................................................................................. 24
DS578DB2
3
CDB8416
1. OVERVIEW
The CDB84166 evaluation board contains a CS8416 and a CS8406 and the supporting circuitry necessary to operate them. The board provides balanced XLR and unbalanced optical and coaxial inputs and outputs as outlined in the AES3 and IEC60958 standards. In Software Mode, the control registers of the CS8416 and CS8406 are set by a Windows based program through the parallel port of a PC.
1.4
Serial Digital Audio Outputs
The right edge of the board is occupied by the serial digital audio outputs. The optical S/PDIF output is always enabled. The user may also choose to enable either the coaxial S/PDIF output or the XLR AES3 output via jumper J11. These outputs are transformer coupled.
1.5
Three Wire (PCM) Serial Audio Input and Output
1.1
CS8416 and CS8406
The features and functions of the CS8416 and the CS8406 are described in their respective data sheets.
1.2
Parallel Port
Header J18 is provided so the user may access the three wire serial audio ports of the receiver and transmitter. The purpose of this port is to allow the user to connect external circuitry such as a DAC, ADC, or DSP to the receiver and transmitter. Signals going into or out of these headers should be operated at VL+. Setting switch S1-M/S in the open position sets the CS8416 as the master and the CS8406 as slave for LRCK and SCLK. Setting switch S1-M/S in the closed position sets the CS8406 as the master and the CS8416 as slave for LRCK and SCLK. Setting switch S3-8416_PCM to the open position will turn off all of the input/output buffers for the CS8416. Setting switch S4-8406_PCM to the open position will turn off all of the input/output buffers for the CS8406. These switches allow the user to independently set the input and output for the CS8416 and CS8406.
To use the CS8416 and CS8406 on the board in Software Mode, the parallel port on the upper right hand side of the board should be connected to the parallel port of the PC running the CDB8416 control software.
1.3
Serial Digital Audio Inputs
The left edge of the board is occupied by a row of serial digital audio input connectors. In either Hardware or Software Mode the user must select which inputs are to be used via the switch setting, INPUT, on switch S3. Set the switch to the open position to select the XLR balanced input which will use the RXP1 and RXN inputs of the CS8416. Set the switch to the closed position to select the optical/coaxial unbalanced inputs which will use the RXP0 and RXP2 through RXP7 inputs of the CS8416. This will AC couple the RXN input to GND. Note that in Hardware Mode, only RXP0 through RXP3 on the CS8416 are available for use. To select between the inputs in Hardware Mode, use the RXSEL0 and RXSEL1 switches on S3.
1.6
Crystal Oscillators
Oscillator Y1 provides the System Clock (OMCK) for the CS8416. The crystal oscillator on the board is mounted in pin sockets that allow it to be removed or replaced. The board is shipped with a 12.288 MHz crystal oscillator stuffed at Y1, setting the output sampling rate to 48 kHz. Please refer to the CS8416 data sheet for details on OMCK operation.
4
DS578DB2
CDB8416
1.7 LED Function Indicators
NV/RERR, AUDIO, and 96 kHz output of the CS8416 in Hardware Mode. See the CS8416 data sheet for an explanation of the conditions that activate each of these outputs.
Several LEDs are provided to indicate board functions. D9 indicates that power is present to the VD+/VA+ section of the CS8416 and CS8406. D11, D12, and D13 indicate the status of the
2. CONFIGURATION SETTINGS
CONNECTOR J3 (+5V) J4 (GND) J5 (VL+) J6 (VD+/VA+) J9, J16, J21 OPT1-OPT4 J2 J1 J20 J19 J10 J18 INPUT/OUTPUT Input Input Input Input Input Input Input Input/Output Output Output Output Input/Output SIGNAL PRESENT
+5 Volt Supply for supporting circuitry Ground connection from power supply +3.3 to 5.0 Volt Digital Logic power for the CS8416 and CS8406 +3.3 Volt VD+/VA+ when not using the onboard regulator Digital Audio Interface coaxial input Digital Audio Interface optical input Digital Audio Interface XLR input Parallel port for connection to parallel port of PC Digital Audio Interface optical output Digital Audio Interface coaxial output Digital Audio Interface XLR output I/O for CS8416 and CS8406 PCM data and clocks
Table 1. System Connections JUMPER PURPOSE Selects between using a separate supply for J7 J8 J12 J13 J17 J14 J15 J11 POSITION ADJUST VL+ or using the +5 Supply. +5V Selects between using a separate supply for REG VD+/VA+ or using the onboard +3.3V regulator. ADJUST Current measurement for CS8416 VA+ CLOSED OPEN Current measurement for CS8416 VD+ CLOSED OPEN Current measurement for CS8416 VL+ CLOSED OPEN Current measurement for CS8406 VD+ CLOSED OPEN Current measurement for CS8406 VL+ CLOSED OPEN Selects between coaxial or XLR output XLR COAX FUNCTION SELECTED
Uses J5 to supply from +3.3V to +5.0V for VL+ Uses J3 to supply +5V for VL+ Uses the onboard +3.3V regulator for VD+/VA+ Uses J6 to provide the +3.3V supply for VD+/VA+ Normal operation Use J13 to measure CS8416 VA+ current Normal operation Use J12 to measure CS8416 VD+ current Normal operation Use J16 to measure CS8416 VL+ current Normal operation Use J14 to measure CS8406 VD+ current Normal operation Use J15 to measure CS8406 VL+ current Selects XLR output on J10 Selects coaxial output on J19
Table 2. CDB8416 Jumper Settings
DS578DB2
5
CDB8416
SWITCH S1-H/S S1-M/S S1-SFMT1 S1-SFMT0 POSITION OPEN CLOSED Selects Master or Slave Mode for LRCK OPEN and SCLK. CLOSED Selects serial audio output format for the 00 CS8416 and input format for the CS8406. 01 10 11
Selects Hardware or Software Mode for CS8416 and CS8406. Selects CS8416 receiver input topology.
PURPOSE
FUNCTION SELECTED
CS8416 and CS8406 are in Hardware Mode. CS8416 and CS8406 are in Software Mode. CS8416 Master. CS8406 Slave. CS8416 Master. CS8406 Slave. Left Justified 24 bit I2S 24 bit Right Justified 24 bit Direct AES3 (CS8416) Right Justified 16 bit (CS8406) XLR balanced input. Optical/Coaxial unbalanced input. CS8416 I/O buffers off. CS8416 I/O buffers on. NVERR output selected. RERR output selected. RXP0 Selected RXP1 Selected RXP2 Selected RXP3 Selected RXP0 pass through to TX RXP1 pass through to TX RXP2 pass through to TX RXP3 pass through to TX CS8406 I/O buffers off. CS8406 I/O buffers on. TCBL set to output. TCBL set to input. Mode B is selected. Mode A is selected.
S3-INPUT
S3-8416_PCM Controls the input/output buffers for the
CS8416 serial audio port.
S3-NVSEL S3-RXSEL1 S3-RXSEL0
Selects between NVERR and RERR. Hardware mode RXP input channel select for the CS8416.
S3-TXSEL1 S3-TXSEL0
Hardware mode TX pass through channel select for the CS8416
S4-8406_PCM Controls the input/output buffers for the
CS8406 serial audio port.
S4-TCBLD S4-CEN
Selects the direction of TCBL for the CS8406. Selects input method for channel status, user, and validity data.
OPEN CLOSED OPEN CLOSED OPEN CLOSED 00 01 10 11 00 01 10 11 OPEN CLOSED OPEN CLOSED OPEN CLOSED
Table 3. CDB8416 Switch Settings
6
DS578DB2
CDB8416
3. BOARD SETUP 3.1 Power Supplies:
1) Verify that all power supplies are off before making connections. 2) Connect a +3.3 V DC power supply to the VD+/VA+ (J6) binding post and place jumper J8 in the ADJUST position. This connection may be omitted by setting J8 to the REG position. VD+/VA+ will be derived from the onboard +3.3V regulator. 3) Connect a +3.3 V to +5.0 V DC power supply to the VL+ (J5) binding post and place jumper J7 in the ADJUST position. This connection may be omitted by setting J7 to the +5 V position. VL+ will be derived from the +5 V binding post. 4) Connect a +5.0 V DC power supply to the +5 V (J3) binding post. 5) Connect the common ground of the power supplies to the GND (J4) binding post. 6) Apply power to the board. D9 should illuminate indicating power is applied to VD+/VA+. effect Software Mode operation. 3) Press and release the RESET switch S2. The board should now be setup for use in Software mode. 4) Connect a DB-25 parallel port cable from the PC's parallel port to J1 on the CDB8416.
3.3.1
Installing the Software:
1) Create a directory called CDB8416 anywhere on your system. 2) Copy CDB8416.exe from the included CD into this directory. 3) Run port95nt.exe from the CD. After running the program the system will need to be restarted. 4) If desired, create a shortcut to CDB8416.exe on your desktop. You should now be able to run CDB8416.exe. 5) Double-click on CDB8416.exe or its shortcut. 6) Click on the button on the lower right labeled "Advanced". 7) Select the LPT port you are using to connect to the CDB8416. 8) Shut down the application, reset the board, and then restart the application.
3.2
Hardware Mode Settings:
1) Place switch S1-H/S in the OPEN position. 2) Place switches S3-INPUT, S3-8416_PCM, S3NVSEL, S3-RXSEL1, S3-RXSEL0, S3TXSEL1, S3-TXSEL0, S1-M/S, S1-SFMT1, S1-SFMT0, S4-8406_PCM, S4-TCBLD, S4CEN to the appropriate positions. 3) Press and release the RESET switch S3. The board should now be setup for use in Hardware Mode.
3.3.2
Verifying Board Operation:
1) In the "CS8416 AES Receiver Controls" window, select the check box "Enable Internal Clocks" (enables the RUN bit in the Clock Control register). 2) In the "CS8406 AES Transmitter Controls" window, select the check box "Enable Clocks" (enables the RUN bit in the Clock Control register). 3) In the "CS8416 AES Receiver Controls" window, select the check box "Generate SCLK/LRCK". Make sure that switch S1-M/S is in the OPEN position.
7
3.3
Software Mode Settings:
1) Place switch S1-H/S in the CLOSED position. 2) Place switches S1-M/S, S3-INPUT, S38416_PCM, and S4-8406_PCM to the appropriate positions. All other switch setting do not
DS578DB2
CDB8416
4) Check the performance of the board by doing an FFT with a -1 dBFS 1 kHz sine wave for input at a 48 kHz sample rate using the optical input and optical output.
8
DS578DB2
CDB8416
4. CDB8416.EXE USER'S GUIDE 4.1 Main Window
The main window of the CDB8416 Control Application allows the user to view the configuration of the CS8416. Clicking the left mouse button on the CS8406 Controls button will bring up a control panel containing all the register bits relevant to that part. Clicking on the Advanced button at the lower right brings up the Advanced Options control panel. Within the Advanced Options you may read and write hex values into specified registers in either part. Changes made on the CS8406 or CS8416 control panels will also be immediately reflected in the Main Window, so you may wish to arrange them so that they do not obscure each other.
Figure 1. CS8416 Control Panel
DS578DB2
9
CDB8416
Figure 2. CS8406 Control Panel
Figure 3. Advanced Control Panel
10
DS578DB2
DS578DB2
PC Interface
RX Input Buffers
CS8416
PCM
CS8406
TX Output
Figure 4. CDB8416 Block Diagram
CDB8416
11
CDB8416
12
DS578DB2
Figure 5. Power
CDB8416
Figure 6. Digital Audio Inputs
DS578DB2
13
14
CDB8416
DS578DB2
Figure 7. Hardware Switches
CDB8416
DS578DB2
Figure 8. Buffers 15
16
CDB8416
DS578DB2
Figure 9. Clock Buffers
CDB8416
DS578DB2
Figure 10. CS8416 17
CDB8416
18
DS578DB2
Figure 11. CS8406
DS578DB2 Figure 12. Digital Audio Outputs
CDB8416
19
20
CDB8416
DS578DB2
Figure 13. PC Control Interface
DS578DB2 Figure 14. Silkscreen Top
CDB8416
21
CDB8416
Figure 16. Bottom
22
DS578DB2
Figure 16. Bottom
CDB8416
DS578DB2
Figure 15. Top 23
CDB8416
5. BILL OF MATERIAL
Item
1 41
Qty
Reference
C1 C2 C4 C5 C8 C9 C10 C11 C12 C14 C16 C18 C19 C20 C21 C23 C25 C26 C29 C30 C31 C32 C34 C35 C36 C38 C42 C44 C47 C51 C53 C59 C61 C64 C66 C67 C68 C69 C70 C72 C75 C3 C6 C7 C13 C49 C15 C22 C27 C40 C54 C71 C76 C17 C24 C28 C37 C39 C45 C46 C50 C55 C62 C63 C65 C73 C74 C33 C56 C41 C43 C52 C60
Part Number
C0805C104J5RAC
Manufacturer
KEMET
Description
CAP, 0.1UF, X7R, 0805, 50V, 5%
2 3 4 5
5 7 1 13
ECE-V1AA101WR C0805C103K5RAC C0805C561J5RAC C0805C102J5RAC
PANASONIC KEMET KEMET KEMET
CAP, 0.01UF, X7R, 0805, 50V, 10% CAP, 560PF, X7R, 0805, 50V, 5% CAP, 1000pF, X7R, 0805, 50V, 5% CAP, 0.01UF, X7R, 0805, 50V, 5% CAP, 10uF, ELEC, VS SERIES, SMT CASE-A, 16V, 20% CAP, 22PF, COG, 0805, 50V, 5% CAP, 0.22UF, X7R, 1206, 50V, 5% CAP, 0.01UF, COG, 1206, 25V, 5% SCHOTTKY POWER RECTIFIER, SMT SOD123 CASE LED, SMT, YELLOW LED, SMT, RED LED, SMT, GREEN JUMPER WIRE DO NOT POPULATE
6 7
2 4
C0805C103J5RAC ECE-V1CS100SR
KEMET PANASONIC
8 9 10 11
1 1 1 9
C48 C57 C58 D1 D2 D3 D4 D5 D6 D7 D8 D10 D9 D11 D12 D13 GND1 GND2 GND3 GND4 GND5 GND6 GND7 GND8 GND9 J1
C0805C220J5GAC C1206C224J5RAC C1206C103J3GAC MBR0520LT1
KEMET KEMET KEMET MOTOROLA
12 13 14 15 16 17
1 2 1 5 4 1
CMD28-21VYC/TR8/T1 CHICAGO MINIATURE CMD28-21SRC/TR8/T1 CHICAGO MINIATURE CMD28-21VGC/TR8/T1 CHICAGO MINIATURE
747842-6
AMP
18 19 20 21 22 23
1 1 1 1 1 3
J2 J3 J4 J5 J6 J7 J8 J11
NC3FD-H 111-0102-001 111-0103-001 111-0104-001 111-0110-001 TSW-103-07-G-S
NEUTRIK E.F. JOHNSON E.F. JOHNSON E.F. JOHNSON E.F. JOHNSON SAMTEC
CONNECTOR, DB25, MALE, RT. ANGLE, 0.318 MNT CONNECTOR, XLR, FEMALE BINDING POST, RED BINDING POST, BLACK BINDING POST, GREEN BINDING POST, BLUE STAKE HEADER, 3X1, 0.1" CTR, GOLD
Table 4. CDB8416 Bill of Materials 24 DS578DB2
CDB8416
Item
24 25 26 27 28 29 30 31 32 33 34 35 4 1 5 1 1 4 1 4 3 2 2 12
Qty
Reference
J9 J16 J19 J21 J10 J12 J13 J14 J15 J17 J18 J20 L1 L2 L3 L5 L4 OPT1 OPT2 OPT3 OPT4 R1 R3 R32 R2 R95 R4 R64 R5 R6 R7 R8 R9 R10 R11 R12 R14 R15 R16 R17 R13 R18 R19 R20 R23 R24 R25 R28 R29 R31 R67 R71 R84 R88 R89 R90 R30 R33 R35 R37 R47 R76 R80 R34 R65 R96 R36 R38 R39 R53 R75 R91 R94 R40 R41 R43 R48 R56 R57 R69 R70 R72 R77 R78 R79 R49 R50 R51 R55 R59 R63 R54 R68 R44 R60 R73 R81 R52 R46 R62 R74 R61 R21 R26 R58 R86 R22 R27 R66 R87
Part Number
ARJ-2018-1 NC3MD-H TSW-102-07-G-S TSW-105-07-G-D TOTX173 ELJ-FA470KF FB73-226 TORX173 CRCW0805100FT CRCW1206271J CRCW080590R9F CRCW08052001F
Manufacturer
A/D ELECTRONICS NEUTRIK SAMTEC SAMTEC TOSHIBA PANASONIC J.W.MILLER TOSHIBA DALE DALE DALE DALE
Description
RCA JACK - RIGHT ANGLE, GOLD PLATED CONNECTOR, XLR, MALE STAKE HEADER, 2X1, 0.1"CTR, GOLD STAKE HEADER, 5X2, 0.1"CTR, GOLD OPTICAL TOSLINK TRANSMITTER INDUCTOR, 47uH, 1210, TYPE FA, 10% FERRITE BEAD, 040MHz OPTICAL TOSLINK RECEIVER RES, 10-OHM, 0805, 1/10W, 1%. 100ppm RES, 270, 1206, 1/8W, 5%, 200ppm RES, 90.9 OHMS, 0805, 1/10W, 1%. 100ppm RES, 2K, 0805, 1/10W, 1%. 100ppm RES, 1.65K, 0805, 1/10W, 1%. 100ppm RES, 47K, 0805, 1/10W, 5%, 200ppm
36 37
1 23
CRCW08051651F CRCW0805473J
DALE DALE
38 39
1 10
R42 R45 R82 R83
NP-RES-0805 CRCW08051000F
N/A DALE
40 41 42 43
3 1 8 19
CRCW080575R0F CRCW08051100F ERJ-6GEYJ330V CRCW0805000FT
DALE DALE PANASONIC DALE
DO NOT POPULATE RES, 100-OHM, 0805, 1/10W, 1%. 100ppm. 100ppm RES, 75.0 OHMS, 0805, 1/10W, 1%. 100ppm RES, 110 OHMS, 0805, 1/10W, 1%. 100ppm RES, 33 OHMS, 1/10W,0805, 5% RES, 0-OHM, 0805
44 45 46 47
5 1 1 1
CRCW08051R0J NP-RES-1206 CRCW12061001F CRCW08053740F
DALE N/A DALE DALE
RES, 1 OHM, 0805, 1/8W, 5%, 300ppm DO NOT POPULATE RES, 1K, 1206, 1/8W, 1%, 100ppm RES, 374 OHMS, 0805, 1/10W, 1%. 100ppm
Table 4. CDB8416 Bill of Materials (Continued) DS578DB2 25
CDB8416
Item
48 49 50 51 52 53 54 1 2 1 1 1 1 3
Qty
R85
Reference
Part Number
CRCW1206622J
Manufacturer
DALE
Description
R92 R93 S1 S2 S3 S4 T1 T2 T3
55 56
1 15
U1 U2 U4 U5 U6 U11 U12 U14 U15 U17 U18 U23 U24 U25 U26 U27 U3 U7 U8 U16 U9 U10 U13 U21 U22
57 58 59 60 61
1 1 2 2 3
62
1
U19
63
1
U20
64 65
1 1
X4 Y1
66 67
3 4
Z1 Z2 Z3 J1,J4,J6,J7
68 69
6 4
X1 X2 X3 X4 X5 X6 YX2
RES, 6.2K, 1206, 1/8W, 5%, 200ppm CRCW0805511J DALE RES, 510, 0805, 1/8W, 5%, 200ppm 76SB04 GRAYHILL 4 POSITION DIP SWITCH PTS645TL50 C&K SWITCH, MOMENTARY, PUSHBUTTON 76SB07 GRAYHILL 7 POSITION DIP SWITCH 76SB03 GRAYHILL 3 POSITION DIP SWITCH 67129600 SCHOTT SCHOTT XFMR, ISOLATION FOR DIG AUDIO,SHIELDED LM1117MPX-3.3 NATIONAL SEMICON- REGULATOR, VOLTAGE, DUCTOR FIXED, 3.3V, SOT-223 74VHC125MTC FAIRCHILD SEMIIC, QUAD BUFFER WITH CONDUCTOR HIGH-Z--STATE OUTPUTS, TSSOP14-173 SN74HC574DW FAIRCHILD IC, OCTAL D-TYPE FLIPFLOPS, TSSOP20-173 DS1233AZ-10 DALLAS SEMICONIC, 3.3-VOLT ECONO DUCTOR RESET, SOT223 SN74AC32MTC FAIRCHILD SEMIQUAD 2-INPUT POS-OR CONDUCTOR GATE, TSSOP14-4.4mm NC7SZ04M5 FAIRCHILD TINYLOGIC UHS INVERTER, SOT23-5 NC7SZ125M5 FAIRCHILD TINYLOGIC UHS BUFFER W/ HIGH-ZSTATE OUTPUT, SOT235 CS8416-CS CRYSTAL SEMICON- IC, 192kHz DIGITAL DUCTOR AUDIO RECEIVER, SO28-300 CS8406-CS CRYSTAL SEMICON- IC, 192kHz DIGITAL DUCTOR AUDIO TRANSMITTER, SO28-300 313-6477-032 E.F.JOHNSON STANDOFF, #4-40,.25 HEX x .875 LG CX21AF-12.288MHZ CAL CRYSTAL OSCILLATOR, 12.288MHZ, FULLSIZE CASE P6KE6.8 MOTOROLA TRANSIENT SUPPRESSOR, 6.8V SQUIRES ELECBINDING POST WIRE L1.5x.25"TINx.25"TIN,TY TRONICS PE E H343-ND DIGI-KEY SCREW,440,5/16",MACHINE 8134-HC-5P2 AUGAT SOCKET,PIN,POPIN,SMALL,GOLD
Table 4. CDB8416 Bill of Materials (Continued)
26
DS578DB2
* Notes *

▲Up To Search▲

Price & Availability of CDB8416

	To Download CDB8416 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .